MG-1A aluminiumlegering med PTFE-tejp självsmörjande lager
MG-1A aluminiumlegering med PTFE-tejp självsmörjande lager
Hem >> Kataloger
>>
Metall-polymer kompositlager >> MG-1A aluminiumlegering med PTFE-tejp självsmörjande lager
Marginal Bearing mg-1a aluminiumlegering med ptfe-tejp självsmörjande lager en specialiserad tillverkare av självsmörjande lager och bussningar, Marginal Bearing som grundades år 2010, ägnar sig åt att utveckla och tillverka nya självsmörjande lagermaterial.
This material structure enables the final parts tube lighter and easier for installation. Suitable for dry running,low coefficient of friction, lower wear, good sliding characteristics,the transfer film created can protect the mating metal surface,suitable for rotary,linear and oscillating movement.
◆ Technical Data:
| Technical Data | ||
| Max.load | Static | 80 N/mm |
| Very low speed | 40N/mm | |
| PV (dry running) Max. | Roatating oscillating | 20N/mm |
| Short-term operation | 2.8N/mm2·m/s | |
| Continuous operation | 1.8N/mm ·m/s | |
| Temp. limit | -65℃~+260℃ | |
| Friction coenncient | 0.05~0.20 | |
| Max. speed | Dry running | 1m/s |
| Hydrodynamic operation | >2m/s | |
| Thermal conductivity | 230 W(m·k)-1 | |
| Coenncient of thermal expansion | 24×10 ·K | |
tyvärr, det finns ingen info nu!
With aluminum metal backing, the bearing could be applied for OA machines,fitness equipment, bicycle,
motorcycle, food industry machinery andpackage machinery, which need light design.
